Equipment room · Design and installation
Structured cabling rack, installed as part of the complete solution.
The rack is the heart of the equipment room: if it is badly built, the best-cabled network in the world fails from the center.
A structured cabling rack is not something you pick from a catalog and bolt to the wall. It is designed together with the cabling, the power and the switching it is going to house, because its order decides whether the network can be maintained without taking it down.
We do not sell loose racks. We integrate them into a complete project: patch panels, cable managers, labeling, UPS and ventilation, all documented and certified to TIA/EIA standards.
The result is an equipment room where any engineer, ours or yours, can identify a port in seconds and make a change without putting the rest of the network at risk.
Project scope
What a properly installed structured cabling rack includes
Patch panels and cable managers
Every link terminated on a patch panel, with horizontal and vertical cable managers so nothing hangs over the equipment.
Labeling and documentation
Every port identified on the rack and on the drawing. Without documentation, the equipment room becomes a black box at the first staff change.
Backed-up power
APC or TrippLite UPS units sized for the real load of the rack, with electrical cabling independent from plant power.
Integrated switching and servers
Cisco or Fortinet switches, servers and storage mounted with their ventilation and fiber routes planned from the design stage.
Part of a system
The rack is not an accessory: it is where the network becomes maintainable, or not
A saturated rack with no cable managers and no labels turns every change into a risk. Unplugging the wrong patch cord takes down a production line, and nobody knows which one it was.
That is why we treat it as part of the structured cabling and not as furniture. It is designed to the same standard, documented on the same drawing and certified with the same equipment.
Delivered projects
Equipment rooms already running on our racks
Marelli
Panduit FiberRunner solution, TrippLite UPS, Fortiswitch and Cisco switches.
Dr. Oetker / D'Gari
HPE SAS, hard drives, 10 KVA UPS and network nodes.
KDDI Denso
Servers, CAT6A cabling and Cisco FirePower.
Hitachi-Astemo
Cisco switches and 30, 10 and 6 kva UPS.
Each equipment room was sized for its real equipment and power load, not built around a standard rack.
Request a quote
Tell us what is going to live in your equipment room
An engineer reviews your case and gets back to you within 24 hours. No cost, no commitment.